KOBE Brand Range Hood Model No. RA9436SQF RA9
8 OPERATION INSTRUCTIONS This KOBE hood is equipped with four electronic controls with a 10-second standby startup & 30-se
9 MAINTENANCE For the optimal level of operation, clean the range hood surface and filters regularly. To Clean Hood Surface CAUTION: NEVER US
10 SPECIFICATIONS MODEL / SIZE RA9436SQF / 36" (RA-9436 + AF-9436) RA9436SQB / 36” (RA-9436 + BF-9436) COLOR # 304 Commercial Grade Sta
11 MEASUREMENTS & DIAGRAMS Front View
12 PARTS LIST MODEL NO.: RA9436SQF RA9436SQB NO. DESCRIPTION MODEL / SIZE PART NO. 1 Duct Cover-Mounting
13 MODEL NO.: RA9436SQF RA9436SQB Complete Set: Model No. RA9436SQF – Required RA-9436 & AF-9436 Model No. RA9436SQB – Required RA-94
14 CIRCUIT DIAGRAM MODEL NO.: RA9436SQF RA9436SQB
15 DISCLAIMER 1. CAREFULLY INSPECT ALL ITEMS FOR DAMAGES BEFORE ACCEPTING DELIVERY. NOTE ANY DAMAGES ON THE FREIGHT BILL OR EXPRESS R
16 WARRANTY WARRANTY CERTIFICATE KOBE Range Hoods, Inc. warrants all products manufactured or supplied by it to be free from defects in workman
17 5) Damages caused during shipment are not covered under our warranty. CONSEQUENTIAL DAMAGE The warrantor is not responsible for any conse
- READ AND SAVE THESE INSTRUCTIONS - CONTENTS Important Safety Instructions...
18 PRODUCT REGISTRATION Register Your Product! Any covered failure occurring within two years of original purchase arising from
1 IMPORTANT SAFETY INSTRUCTIONS - PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION - WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHO
2 What to Do In The Event Of a Range Top Grease Fire SMOTHER FLAMES with a close fitting lid, cookie sheet, or metal tray, and then turn off the
3 COMPONENTS OF PACKAGE (Must keep all material for returns or refunds) BOX 1 OF 2 BOX 2 OF 2 REQUIRED ONE OF THESE ITEM: Item No. BF-9436 (M
4 INSTALLATION PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING Calculation before Installation To calculate the length of the installation
5 Preparation before Installation NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING. Decide the location o
6 4. Secure and tighten the mounting screws. CAUTION: MAKE SURE THE HOOD IS SECURE BEFORE RELEASING. Ductwork Installation 5. Using Refere
7 inner duct cover with two (4x8 mm) screws (provided). 12. Fasten outer duct cover to plastic plate on the hood with four (4x8 mm) sc
Commentaires sur ces manuels